DMR-MARC Canada Net setting for the mmdvm.ini file

DMR-MARC Canada Net setting for the mmdvm.ini file

Running MMDVM on raspberry pi3 with DVMEGA/bluestack via serial cable to the pi. I don't need the pi if I use bluedv but it is very unstable on the pc. Cell phone connection is not bad.

This is my mmdvm. ini file and contents is listed below (attached).

I am not sure how to put the Florida server in here for TG4580.

I highlighted (bold) the section where the servers can be enabled.

Can more than one server be enabled and how to switch between them, or just leave it on the Florida server for everything including non dmr+ for brandmeister?

Then again what is the name or url for the Florida server, I can't find any server lists anywhere.

Bluedv has it as a setting but just by name as USA-FLORIDA


mmdvm. ini file
[General]
Callsign=VA3xxx
Timeout=320
Duplex=0
# ModeHang=15
RFModeHang=10
NetModeHang=3
Display=None
Daemon=0

[Info]
RXFrequency=437000000
TXFrequency=437000000
Power=1
Latitude=+43.8400
Longitude=-079.4620
Height=0
Location=Vaughan Ontario
Description=MMDVM-DVMega
URL=www. qrz. com/db/

[Log]
# Logging levels, 0=No logging
DisplayLevel=2
FileLevel=2
FilePath=/home/pi/MMDVMHostlog
FileRoot=MMDVM

[CW Id]
Enable=0
Time=10

[DMR Id Lookup]
File=DMRIds. dat
Time=24

[Modem]
# DVmega plugged in to Raspberry via USB
Port=/dev/ttyUSB0
# Port=\\.\COM0
# DVmega plugged in to Windows via USB

[Modem]
# Port=/dev/ttyACM0
# Port=\\.\COM24
# Port=\\.\COM0
# Port=/dev/ttyS0
# Port=/dev/ttyAMA0
# Port=/dev/ttyACM0
# Port=\\.\COM3
# Port=/dev/ttyUSB0
TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
DMRDelay=0
RXLevel=50
TXLevel=50
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
OscOffset=0
RSSIMappingFile=RSSI. dat
Debug=0

[UMP]
Enable=0
# Port=\\.\COM4
Port=/dev/ttyACM1

[D-Star]
Enable=0
Module=B
SelfOnly=0

[DMR]
Enable=1
Beacons=0
Id=3023000
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=1
DumpTAData=0
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4

[System Fusion]
Enable=0
RemoteGateway=0

[P25]
Enable=0
NAC=293

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=1
Address= 75.151.47.162 // USA-Florida
#  OR
# Address= 66.170.180.70 // CANADA-DMRQ
# Address=central. brandmeister. us
# Address=east. brandmeister. us
# Address=west. brandmeister. us
# Address=64.94.238.196
# Address=brandmeister. pd0zry. ampr. org
Port=62031
Jitter=300
Local=4580 // Canada English
# Local=3100
Password=passw0rd
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3200
GwyAddress=127.0.0.1
GwyPort=4200
Debug=0

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[TFT Serial]
# Port=modem
Port=/dev/ttyAMA0
Brightness=50

[HD44780]
Rows=2
Columns=16
# For basic HD44780 displays (4-bit connection)
# rs, strb, d0, d1, d2, d3
Pins=11,10,0,1,2,3
# Device address for I2C
I2CAddress=0x20
# PWM backlight
PWM=0
PWMPin=21
PWMBright=100
PWMDim=16
DisplayClock=1
UTC=0

[Nextion]
# Port=modem
# Port=/dev/ttyAMA0
Port=/dev/ttyUSB0
Brightness=50
DisplayClock=1
UTC=0
IdleBrightness=20

[OLED]
Type=3
Brightness=0
Invert=0

[LCDproc]
Address=localhost
Port=13666
#LocalPort=13667
DimOnIdle=0
DisplayClock=1
UTC=0