the heights of the receiving antenna: 400 feet, transmitting antenna 700 feet
#hamr #hamradio
8/07/2016
VE3UHM Hamilton repeater August 2016
New the Hamilton repeater updates, hight changed but still on the CHCH tower. VE3UHM, the DMR repeater in Hamilton, ON has changed frequencies to 444.0375+
the heights of the receiving antenna: 400 feet, transmitting antenna 700 feet
#hamr #hamradio
the heights receiving antenna: 400 feet, transmitting antenna 700 feet
the heights of the receiving antenna: 400 feet, transmitting antenna 700 feet
#hamr #hamradio
Subscribe to:
Post Comments (Atom)
I programmed the frequencies, no luck. As soon as I find out more info Ill pass it along. Yes same site as far as I hear they raised it from the previous 60 foot mark giving it better coverage for us ;-) Same repeater.
ReplyDeleteTomas
An update to the VE3UHM repeater, it is active but only on the local talk group, I’ve tried to key up on my handheld in my apartment but no results, once I get in the vehicle and hook my radio up the antenna on the roof of the vehicle I’ll try to key it up and see what happens. The antenna was at 100 feet until they reconfigured the main antennas, now the heights are, receiving antenna: 400 feet, transmitting antenna 700 feet.
ReplyDeleteSteven SMC
VE3UHM is now on 444.0375 + MHz
ReplyDeleteIt is fully operational and on line.
Rx is at 400 feet and transmitting at 700 feet.
Internet linking is now active.
All previous talkgroups supported are still current.
Jon
Freq is 444.0375 MHz the internet was down at the site cables had to be replaced.It should be operational now. Remember it takes time to do the work. Rx is at 400 ft Tx at 700 ft
ReplyDeleteApparently there where huge interference issues on the antenna they use for DSTAR, DMR. This is why they lowered the antenna 6 month ago because they could not identify the issue. Now that the raised the antenna , reprogrammed the repeater and installed some filters coverage is right into Toronto lake front via a handheld is what I heard John say. DStar requires some additional programming that needs a physical PC Connections which could happen in the next few weeks.
ReplyDelete